Kubota B2650 Скачать руководство пользователя страница 49

29

OPERATING THE TRACTOR

B

Adjustment of Foldable ROPS

A

Adjust free fall of the ROPS upper frame regularly.

A

If you feel less friction in folding the ROPS, tighten the
nut (1) until you feel the right friction in the movement.

STARTING

A

The seat and suspension should be adjusted to
ensure that the controls are comfortably at hand for the
operator, ensuring that the operator maintains a good
posture and minimizes risks from whole body
vibration.

B

Operator's Seat

To avoid personal injury:

A

Make sure that the seat is completely secured
after each adjustment.

A

Do not allow any person other than the driver to
ride on the tractor.

[B2650/B3350]

C

Position adjustment

Pull in the position adjust lever and slide the seat
backward or forward, as required. The seat will lock in
position when the lever is released.

A

After adjusting the operator's seat, be sure to check
that the seat is properly locked.

(1) Nut

1. Adjusting the operator's position.

(1) Seat
(2) Position adjust lever

(A) "PULL UP"

Содержание B2650

















































































































Отзывы: