background image

9

Introduction 

4/10/19

AP-SR2672, & AP-SR2690 for Skid Steer Powered Rakes 321-004MK

Table of Contents

Introduction

Owner Assistance

The dealer should complete the Online Warranty 
Registration at the time of purchase. This information is 
necessary to provide you with quality customer service

The parts on your Powered Rake have been specially 
designed by Kubota/Land Pride and should only be 
replaced with genuine Kubota parts. Contact a Kubota 
dealer if customer service or repair parts are required. 
Your Kubota dealer has trained personnel, repair parts, 
and equipment needed to service the attachment.

Serial Number

For quick reference and prompt service, record model 
and serial number on the inside cover page and again on 
the warranty page. Always provide model number and 
serial number when ordering parts and in all 
correspondences with your Kubota dealer. For location of 
your serial number plate, see Figure 1.

Serial Number Plate Location

Figure 1

Further Assistance

Your Kubota dealer wants you to be satisfied with your 
new attachment. If for any reason you do not understand 
any part of this manual or are not satisfied with the 
service received, the following actions are suggested:

1.

Discuss any problems you have with your attachment 
with your dealership service personnel so they can 
address the problem.

2.

If you are still not satisfied, seek out the owner or 
general manager of the dealership, explain the 
question/problem, and request assistance.

3.

For further assistance write to:

Kubota by Land Pride

Service Department

1525 East North Street

P.O. Box 5060

Salina, Ks. 67402-5060

E-mail address

[email protected]

30939

Kubota welcomes you to the growing family of new 
product owners. This Powered Rake has been designed 
with care and built by skilled workers using quality 
materials. Proper assembly, maintenance, and safe 
operating practices will help you get years of satisfactory 
use from this attachment. 

Application

Kubota’s SR2672 and SR2690 Skid Steer Powered 
Rakes, with their carbide tipped studded roller, adjustable 
and highly durable urethane material control deflector, and 
20-degree left and right angling will turn your skid steer 
loader into the perfect landscaping tool. These skid steer 
powered rakes are designed to grade, level, rake, and 
remove unwanted objects such as rocks, stones, clods, 
small roots, limbs, twigs, and other material of similar 
nature or size. They can also alleviate unwanted weed 
growth and prepare a seedbed for planting. These 
powered rakes are excellent tools to renovate and 
rejuvenate gravel and cinder driveways, storage lots, and 
warning tracks. They are also very effective at 
reconditioning earthen race tracks and arenas. The 
hydraulic driven roller rotates in both directions for 
traveling both forward and backward. Both models allow 
you to move dirt like a box scraper, windrow rocks like a 
rake and work soil like a pulverizer - all in one tool. 

See 

“Specifications & Capacities” 

on page 26 and 

“Features & Benefits”

 on page 27 for additional 

information and performance enhancing options.

Using This Manual

This Operator’s Manual is designed to help familiarize 
you with safety, assembly, operation, adjustments, 
troubleshooting, and maintenance. Read this manual 
and follow the recommendations to help ensure safe 
and efficient operation. 

The information contained within this manual was 
current at the time of printing. Some parts may change 
slightly to assure you of the best performance.

To order a new Operator’s or Parts Manual, contact 
your authorized dealer. Manuals can also be 
downloaded, free-of-charge, from our website at 
www.landpride.com

Terminology

“Right” or “Left” as used in this manual is determined by 
facing the direction the machine will operate while in use 
unless otherwise stated.

Definitions

IMPORTANT: 

A special point of information related 

to the following topic. Kubota’s intention is this 
information must be read & noted before continuing. 

NOTE:  

A special point of information that the 

operator should be aware of before continuing. 

Содержание AP-SR2672





































Отзывы: