Kubota AP-SA20, Руководство оператора

Страница: 15 / 38

11
Section 1: Assembly & Set-up
AP-SA20 Hydraulic Post Hole Digger 317-215MK
Table of Contents
4/3/19
Hydraulic Hose Assembly For Skid Steers
Figure 1-4
8 Foot Hose assembly for Skid Steers
Refer to Figure 1-4:
1. Remove bolts (#6) and hose cover (#1).
2. Remove plug from motor port “A” and screw o-ring
end of straight adapter (#9) to motor port “A” until
tight.
3. Screw 90
o
elbow (#8) to adapter (#9). Draw elbow up
snug with open end up. Do not tighten at this time.
4. Remove plug from motor port “B” and screw o-ring
end of straight adapter (#9) to motor port “B” until
tight.
5. Screw 90
o
elbow (#8) to adapter (#9). Draw elbow up
snug with open end up. Do not tighten at this time.
6. Insert hydraulic hoses (#12 & #13) through hose
guide (#3) in gearbox housing and screw hoses to
elbows (#8) until tight.
7. Tighten elbows (#8) to adapters (#9).
8. Thread hoses (#12 & #13) through left-hand hose
guide (#2) as shown.
9. Screw MJIC end of 90
o
elbows (#7) to hydraulic
hoses (#12 & #13) until tight.
37750
NOTE: Use Kubota’s 90
o
elbows (#7) if attaching to
Kubota CTL.
10. Select male coupler (#10) or female coupler (#11)
that mates with skid steer’s high pressure coupler.
Hose (#13) is attached to motor port “A”. Attach
selected coupler to hydraulic hose (#13) and tighten.
11. Hose (#12) is attached to motor port “B”. Screw
remaining coupler to hydraulic hose (#12) until tight.
12. Replace hose cover (#1) and secure with existing
5/16"-18 x 5/8" GR5 hex flange serrated bolts (#6).
13. Tighten bolts (#6) to the correct torque.
14. Continue wit “Auger Assembly & Disassembly” on
this page
Auger Assembly & Disassembly
DANGER
!
To avoid serious injury or death:
Keep others away from the post hole digger while the auger is
rotating. A person can become entangled in the auger or hit by
the auger if it swings erratically. Anyone helping should be
kept a safe distance (a minimum of 20 feet or 6 meters) from
the unit while it is rotating.
WARNING
!
To avoid serious injury or death:
Do not install a bolt that is longer than what was originally
supplied with the auger. Protruding hardware is more likely to
entangle a bystander by catching on loose clothing.
NOTE: Flat face couplers (#10 & #11) and 90
o
elbows (#7) are optional. See “Couplers” on page
23 for additional information.
IMPORTANT: Use hoist or other lifting device to lift
Post Hole Digger. If lifting device is not available,
attach Post Hole Digger to a tractor or skid steer and
use equipment hydraulics to raise unit. Refer to
“Hook-Up Post Hole Digger” on page 12.
NOTE: There are a v
ariety of Dirt, Tree, and Rock Auger
sizes and styles available to suit many applications
. For
detailed information, see “Section 3: Options &
Accessories” on page 21.
NOTE: Auger extensions (#7 & #8 in Figure 1-6) are
available in two lengths. For detailed information,
see
“Auger Extensions (Accessory)” on page 21.