![Kubota AP-PS2072 Скачать руководство пользователя страница 26](http://html.mh-extra.com/html/kubota/ap-ps2072/ap-ps2072_operators-manual_2008765026.webp)
Section 3: Operating Procedures
AP-PS2072 & AP-PS2086 Primary Seeders 313-805MK
7/15/19
22
5.
Be sure all bolts and nuts are tight.
6.
Be certain all guards are in place and secure.
7.
Never allow anyone to ride on the seeder.
8.
Do not make turns while seeder is on the ground.
9.
Seeding should not be done in wet conditions as soil
will stick to the rollers.
10. Lower seeder down until resting on its rollers.
11. At first begin seeding at a slow speed and gradually
increase speed until desired speed is achieved.
Maximum speed will vary according to soil
conditions.
12. After seeding the first 10 to15 feet (3.05 to 4.57 m),
stop and check to see that the seeder is adjusted
properly.
Unhook From Tractor 3-Point
Refer to Figure 1-5 on page 15:
1.
Clean the seedbox and seed cups before unhooking
the Primary Seeder. Refer to
2.
Park the tractor and Primary Seeder on level, solid
ground. Preferably store the Primary Seeder inside a
shed to keep moisture away from the seedbox.
3.
Shut tractor down before dismounting. Refer to
4.
Chock front & back rollers to keep unit from moving.
5.
Remove hitch pin keeper (#4) and hitch pin (#3).
Store center link in tractor storage hook.
6.
Reinstall hitch pin (#3) and keeper (#4) in the
seeder’s upper 3-point center clevis.
7.
Remove linchpins (#2) and hitch pins (#1).
8.
Start tractor and drive forward several feet and then
shut tractor down properly before dismounting. Refer
to
9.
Replace hitch pins (#1) in the seeder’s lower 3-point
clevises. Secure with linchpin (#2).
10.
Refer to
on page 20: Remove slow
moving vehicle sign from mounting socket (#7) on
the back of the Primary Seeder and insert it in the
mounting socket on the back of the tractor.
Unhook From Skid Steer
Refer to Figure 1-4 on page 14:
1.
Clean seedbox and seed cups before unhooking the
Primary Seeder. Refer to
2.
Park the skid steer and Primary Seeder on level,
solid ground. Preferably store the Primary Seeder
inside a shed to keep moisture away from the
seedbox.
3.
Disengage skid steer hitch lock pins.
a. If the skid steer hitch lock pins are hydraulic
powered, raise the lock pins to disengage them
from the Primary Seeders hitch plat notches.
Move on to step 4.
b. If the skid steer hitch lock pins disengage
manually, Shut the skid steer down. See
Manually disengage lock pins and move on to
step 5.
4.
Shut tractor down before dismounting. Refer to
5.
Chock front & back rollers to keep unit from moving.
6.
Get in and restart the skid steer.
7.
Slowly lower loader arms while tilting top of hitch
forward and backing up until loader hitch plate clears
top angle bar on the Primary Seeder hitch plate.