Kubota AP-PS2072, Руководство оператора

Страница: 16 / 48

Section 1: Assembly & Set-up
AP-PS2072 & AP-PS2086 Primary Seeders 313-805MK 7/15/19
12
Table of Contents
Power Machine Shutdown
Tractor Shutdown Procedure
The following are basic tractor shutdown procedures.
Follow these procedures and any additional shutdown
procedures provided in your tractor Operator’s Manual
before leaving the operator’s seat.
1. Park tractor and implement on level, solid ground.
2. Lower implement to ground or onto non-concrete
support blocks.
3. Put tractor in park or set park brake, turn off engine,
and remove switch key to prevent unauthorized
starting.
4. Use steps, grab-handles and anti-slip surfaces when
stepping on and off the tractor.
Skid Steer Shutdown Procedure
The following are basic skid steer shutdown procedures.
Follow these procedures and any additional shutdown
procedures provided in your skid steer Operator’s
Manual before leaving the operator’s seat.
1. Park on solid, level ground and lower attachment until
it is flat on the ground or on non-concrete support
blocks.
2. Turn off engine, and remove switch key to prevent
unauthorized starting.
3. If included, raise seat bar and move controls until
both lock.
4. Use steps, grab-handles and anti-slip surfaces when
stepping on and off the skid steer or attachment.
Sling Bracket
Refer to Figure 1-3:
The sling brackets on the seedbox provide lifting points
for hooking lift chains (#1) and lifting the Seeder off the
ground. The chains should be hooked to a spreader bar
vertically above the seedbox sling brackets. Make sure
lift chains (#1) stay vertical while lifting the seeder.
IMPORTANT:
Reference Figure 1-2: Using lift chains that pull at an
angle to the sling brackets will bend the brackets and
can damage the seedbox.
Reference Figure 1-3: Always use a spreader bar to
keep lift chains vertical while lifting the seeder off the
ground.
Improper Lifting Method
Figure 1-2
70966