Kübler Group
7 Annex
English
Operation Manual R60087.0009 - 03
EN | 25
Dispose of disassembled device components as follows:
• Metal components in the scrap metal.
• Electronic components in the electrical waste.
• Plastic parts in a recycling center.
• Sort and dispose of the other components depending on the
material type.
7 Annex
7.1 Limitations
NOTICE
Encoders with cable outlet
Due to the cable material (PVC as standard), encoders with
direct cable outlet can only be used up to -30°C [-22°F]. If you
need a wider temperature range, please contact us.
7.1.1 Definition Temperature Measurement
Under specific conditions, the maximum permissible ambient
temperature must be limited. Therefore one also refers for
encoders to a maximum operating temperature, which is
composed of several components.
An encoder is a mechatronic system that heats up differently
according to the variant. For critical applications close to the
maximum values, determine the actual temperature of the en-
coder in operation.
Measuring point at the flange:
IMG-ID: 85632267
Both the ambient temperature and the mechanical and elec-
trical self-heating are included when measuring the temperat-
ure on the flange.. Therefore, the temperature measured on
the flange gives the operating temperature of the encoder.
NOTICE
Temperature range of connectable components
When choosing the accessories, in particular the connectors,
observe the maximum temperature of these components.