Kuberg CROSS 2016, Руководство пользователя

Страница: 39 / 48

39
OWNER’S MANUAL
On the Kuberg Cross the speed & torque control button is located on the right side
below the top plastic cover, next to the steering column.
3
Release the button when the required mode is selected. The bike will remain in this mode
if turned off and back on, and does not need to be re-selected each time. To select another
mode, repeat this process.
CAUTION!
Sport and Race modes should only be used by experienced riders!
SETTING TOP SPEED LIMIT
Follow these steps to limit the maximum speed on your Kuberg Start/Trial E/Cross.
1
With the bike on, hold the programming button in for 5 seconds – The throttle lights will
flash. - This means that programming mode has been selected.
2
Release the button and lift the back of the bike carefully and turn the throttle. Hold the
throttle at the desired top speed, until the throttle lights flash again. The bike will then
automatically turn off and back on again (this means the bike has now programmed to that
top speed). The top speed will now be set at that speed. The bike will remain in this speed
setting if turned off and back on, and does not need to be re-selected each time. To select
another top speed, repeat this process.
WARNING!
The rear wheel will spin during the TOP SPEED set up procedure. Make sure that the rear wheel
and chain cannot cause harm to you or other people, or come into contact with clothing, bags or
other items. Make sure that the bike is firmly placed on its stand.