Kuberg CROSS 2016, Руководство пользователя

Страница: 21 / 48

21
OWNER’S MANUAL
WARNING!
There are no user serviceable elements incorporated into the motor, motor controller, batteries,
battery charger, throttle, or wiring harness of your KUBERG electric bike. DO NOT ATTEMPT TO
DISASSEMBLE OR ADJUST ANY OF THESE COMPONENTS. Doing so may cause extensive damage
to these components, will void your warranty, and may cause a hazardous condition. If you can-
not resolve a problem using this owner’s manual, contact your KUBERG authorized dealer, or call
the KUBERG Customer Service for assistance.
BREAK-IN PERIOD
To assure future reliability and top-notch performance of your Kuberg Start/Trial E/Cross, pay
extra attention during your first 15 km/10 miles (three full-charge cycles).
Avoid full-throttle starts and accelerate gradually.
Avoid hard braking. New brakes need some time to break in with moderate use for the first
15 km / 10 miles or three full charges.
MOTORCYCLE CONTROLS
POWER SWITCH
Power switch is located on the right hand side of the handle bars. Always switch the bike into Off
position when stopped or parked.
WARNING!
If power is turned on while the throttle is open, the bike will accelerate immediately. This is poten-
tially very dangerous. The rider’s right hand should be used to switch the power on, with no hands
on the throttle.
SPEED & TORQUE CONTROL BUTTON
The speed & torque control button allows the responsible adult to set the maximum speed
anywhere from 1 mph to the bike’s top speed and also change the bike’s maximum power and
torque. There are three distinct power & torque modes. Go to page xxx to read detailed instruc-
tions how to limit the maximum speed or set various power & torque modes. Do not guess the
settings. Always check before allowing the rider back on the bike.
OFF position
ON position