KUARIO Smart Connector, Руководство по установке

Страница: 12 / 20

Version 1.0.5 - 12
Installation
 Kiosk Mode
To solidify the experience with KUARIO Web Kiosk, it is expected to set the MFP to kiosk mode to work with the KUARIO Web
Kiosk. On IT5 MFPs, this setting is unavailable on its web page, so it must be configured on the MFP itself.
To setup the kiosk mode, open the Utility menu on the MFP and go to Administrator Settings. Enter the MFP's administrator
credentials and navigate to System Connection -> OpenAPI Settings. In this menu, scroll down to "Specified Application Start
Setting" and set this to Enable. When enabling this setting, configure the following settings:
§ Set "Default Startup Application Selection" to KUARIO Web Kiosk
§ Set "Basic Function Setting" to "Restrict"

Warning: From this moment on all the other apps on the embedded device will be hidden, they will no longer be
accessible. Normally this should not be a problem, if it is a problem in your case please contact KUARIO Support for help .