KTS GOLD SCAN 3D, Руководство пользователя

Страница: 23 / 28

7
Driver install (after reinstalling of Windows)
If you want to use any other laptop to connect the main unit, or had to reinstall
Windows, copy the folder KTS-Online and Virtual USB drivers from the supplied
USB-stick to your computer first. The first time you connect the main unit through
USB cable, a new Windows Hardware will be recognized. Now starts the Windows
Hardware Wizard. Now click on browse. Choose the folder Virtual USB driver and
then click OK. Now the computer install the first driver. Repeat the same with the
second new hardware, which can be found. Now all the drivers are installed, and you
can start with the measurements.
7.1 The search process
During control of the ground, you can commence with different search-modes.
IMPORTANT: Befor any search operation and flashing Reset-LED it is
essential to press the reset-button, otherwise a faultless measurement is not
guaranteed.
7.1.1
Start-button
By pressing the start-button, the search begins. On the sreen the first results will be
displayed in 2-Dimensional until the path ends, then the measurement automatically
terminates. For the next path, you had to press the start-button again to operate.
7.1.2
Saving the measurement
The measurement data can be stored for later analysis at home.
7.1.3
Tranferring the measurement
If you wish to view the measurment data on another monitor, transfer the data on the
USB-stick.
All software is pre-installed on the USB-stick, so that you can transfer the data on any
other computer and edit.
23