KTS GOLD SCAN 3D, Руководство пользователя

Страница: 13 / 28

4.2 Accumulator and charger
The strong pulse achievement are
supplied by inserted 2000 mA NIMH
accu, which can be loaded with the
high-speed battery charger within 3 - 4
hours fully. With a normal battery
charger the loading procedure
amounts to approx. 12 hours. The
actual working time amounts to,
depending upon coil size and use of headphones approx. 8-12 hours.
The loading procedure is indicated by the red light emitting diode and the end of the
loading procedure by the green light emitting diode. After each loading procedure the
lead for the battery charger should be removed. An additionally available mobile part,
makes a loading of the accus in the car possible.
4.3 Care
Your GOLD SCAN does not need much care, yet there are some points, which
should consider you, to receive in order its optimal ready status. Avoid extreme
temperatures, since it is not to be excluded that electronic construction units are
damaged thereby. Invert a plastic bag over the electronics housing, as soon as you
come into rains, nebulas or dust. Always hold your equipment clean and dry and
wipe off sand and dirt.
4.4 Hint
Metal detectors produce magnetic fields in the search coil and can in the closer
environment of certain industrial plants or electronic devices, which produce a
strong magnetic field in higher frequency ranges (starting from 100 MH), for
disturbances cause. Your equipment is adjustable under these circumstances
functionally, however no more in air so that a quiet sound becomes audible.
4.5 Locationdepth GOLD SCAN
45 cm coil maximum search capacity 270 cm
1 x 1 m coil maximum search capacity till 500 cm
13