KTS-Electronic GmbH & Co. KG - GPA 3000
16
4 Search process
During soil analysis several search probes are available, whereby we recommend to
gain experience with the universal probe at first. The search with the super probe is
therefore a lot easier.
4.1 Search with the universal probe
Start with the ON-/OFF-button.
After switch-on display shows battery condition.
Wireless connection via Bluetooth® from
the
computer to
the
electronic unit.
Hold the probe so that arrows (attached laterally) point to the ground during
search (this way you will attain the highest search performance).
Check of calibration (approx. 2.5) and
Control of sensor value.
Verify that the indicated value is between 2 to 3. Should this not be the case,
change the search direction slightly so that above value is displayed.
4.2 Search with the super probe
The super probe is similar to the universal probe, but offers
approx. 30% more depth
performance. Beforehand it is absolutely necessary to select a search direction where
values between 2 to 3 are displayed.
Start with the ON-/OFF-button.
After switch-on display shows battery condition.
Wireless connection via Bluetooth® from
the
computer to
the
electronic unit.
Hold the probe so that arrows (arranged sidewise) point to the ground during
search (this way you will attain the highest search performance).
Check of calibration (approx. 2.5) and
control of sensor value.
Verify that the indicated value is between 2 to 3. Should this not be the case,
change the search direction slightly so that above value is displayed.
