KTS-Electronic GPA 3000 DR, Руководство пользователя

Страница: 6 / 24

KTS-Electronic GmbH & Co. KG
– GPA 3000 DR
6
Fig. 2.4 Assembled GPA 3000 DR Universal probe with tablet holder
When searching with the universal probe, the telescopic rod should be vertical to the
ground and the universal probe should be held as shown in the picture.
2.1.2 Super probe 1m

Plug the two pieces together and fasten it with the adjusting screw as shown.

Note when re-packaging, you should remove the knurled screw and carefully
pull the super-probe apart to avoid damaging the inner cable.

A 20 cm supplied square tube serves as a spacer between electronics unit and
super probe. The square tube is attached to the top end of the super probe with
a thumbscrew, and the top of the square tube is secured to the electronics unit
with an Allen key.
 Plug the probe in to the “GPA”-socket of the electronic unit.

It is recommended not to disassemble the probe after every use.