KTS-Electronic GmbH & Co. KG
– GOLD SCAN II
11
4. Search progress
4.1 Assembly
1. Install the carbon telescope bar by screwing the carbon tube (adjustable in length)
to the armrest.
2. Insert the plug into the provided
connector of the unit’s backside. The electronic
unit is kept in a carrying leather bag through which lower opening the plug is to be
inserted (see also page 7, item 2.1).
4.2 Usage and selection of searchcoils
In addition to your GOLD SCAN II we deliver several searchcoils, each suitable for
certain applications.
Note:
A slewing of the searchcoil is no longer necessary. Just hold the searchcoil flat and
parallel to the ground and determine your search speed.
4.3 25 cm coil
The 25 cm searchcoil is particularly
suitable for the search after small metal
objects.
Operation:
1. It is advisable to hold the searchcoil parallel to the ground level.
2. After activation and regulation of volume and frequency press the
Reset
-button for soil
balance.
3. For the ground balance regulation hold coil about 5 cm above the ground (on a metal-
free spot, e.g. hold the coil in the air) and press the
Reset-
button for approx. 3 seconds.
With the ground balance regulation the influence of minerals in the soil is neutralized and
less error signals are produced.
4. Repeat the ground balance regulation at various spots, so that the regulation is always
carried out correctly. It is recommendable to repeat this process, particularly by changes
in soil layers as caused by excavations.
