KTR DATAFLEX 70 Series, Инструкция по эксплуатации и сборке

Страница: 2 / 21

DATAFLEX
®
70/...
Torque Measuring Shaft
Operating/Assembly instructions
KTR-N
Sheet:
Edition: 49017 EN
2 of 21
3
Please observe protection
note ISO 16016.
Drawn: 2017-01-02 Shg/Koe Replacing: KTR-N dated 2017-01-02
Verified: 2017-01-02 Shg Replaced by:
DATAFLEX
®
is a maintenance-free torque measuring shaft with integrated speed measurement.
Combined with the steel lamina coupling RADEX
®
-N the complete system forms a torsionally stiff,
double-cardanic coupling with integrated measuring shaft.
1 Technical data 3
2 Advice 5
2.1 General advice 5
2.2 Safety and advice symbols 5
2.3 General hazard warnings 5
2.4 Intended use 6
3 Storage, transport and packaging 6
3.1 Storage 6
3.2 Transport and packaging 6
4 Assembly 7
4.1 Components of DATAFLEX
®
torque measuring shaft 7
4.2 Advice for finish bore 8
4.3 Displacements - alignment of the torque measuring shaft 8
4.4 Assembly of the hubs 9
4.5 Assembly of the RADEX
®
-N clamping ring hubs on the DATAFLEX
®
torque measuring
shaft 9
4.6 Assembly of hubs on the driving and driven side 10
4.7 Assembly of lamina sets 11
4.8 Tightening torque of the fit bolts 11
4.9 Advice for assembly of the DATAFLEX
®
torque measuring shaft 12
4.10 Technical description 12
5 Disposal 20
6 Maintenance and service 20
7 Services, customer service addresses 20
8 EC Certificate of conformity 21
Table of contents