Oil/air cooler
Series OPC
Operating/Assembly instructions
KTR-N
Sheet:
Edition:
43211 EN
6 of 20
5
Please observe protection
note ISO 16016.
Drawn:
2019-10-23 Pz/Str
Replacing:
KTR-N dated 2017-01-02
Verified:
2019-11-04 Pz
Replaced by:
Please read through these operating/assembly instructions carefully before you assemble the oil/air cooler.
Please pay special attention to the safety instructions!
The oil/air cooler is suitable and approved for the use in potentially explosive atmospheres. With the
use in potentially explosive atmospheres please observe the special notes and instructions regarding
safety as per enclosure A.
The operating/assembly instructions are part of your product. Please store them carefully and close to the oil/air
cooler. The copyright for these operating/assembly instructions remains with KTR.
Warning of potentially explosive
atmospheres
This symbol indicates notes which may contribute to
preventing bodily injuries or serious bodily injuries that
may result in death caused by explosion.
STOP
Warning of personal injury
This symbol indicates notes which may contribute to
preventing bodily injuries or serious bodily injuries that
may result in death.
!
Warning of product damages
This symbol indicates notes which may contribute to
preventing material or machine damage.
General advice
This symbol indicates notes which may contribute to
preventing adverse results or conditions.
Warning of hot surfaces
This symbol indicates notes which may contribute to
preventing burns with hot surfaces resulting in light to
serious bodily injuries.
STOP
With assembly and disassembly of the oil/air cooler it has to be made sure that the entire
drive train is secured against accidental switch-on. You may be seriously hurt by rotating
parts. Please make absolutely sure to read through and observe the following safety
indications.
•
All operations on and with the oil/air cooler have to be performed taking into account "safety first".
•
Please make sure to switch off the power pack before you perform your work on the oil/air cooler.
•
Secure the power pack against accidental switch-on, e. g. by providing warning signs at the place of switch-on
or removing the fuse for current supply.
•
Do not reach into the operation area of the machine as long as it is in operation.
•
Please secure the rotating drive components against accidental contact. Please provide for the necessary
protection devices and covers.
2
Advice
2.1 General advice
2.2 Safety and advice symbols
2.3 General hazard warnings
