KTR-STOP
®
L light-xxx A-xx-xx
Operating/Assembly instructions
KTR-N
Sheet:
Edition:
445123 EN
8 of 21
2
Please observe protection
note ISO 16016.
Drawn:
2020-09-25 Shg/Wie
Replacing:
KTR-N dated 2019-11-21
Verified:
2020-11-05 Shg
Replaced by:
Subassembly 3: Pad retraction set
Compo-
nent
Quantity
Description
Illustration 6: Pad retraction set
3.1
1
Cap screw
DIN EN ISO 4762
3.2
1
Pipe
3.3
1
Pressure spring
3.4
2
Disk
3.5
1
Sealing plug
To ensure the full braking power, the preparation for assembly needs to be carefully per-
formed.
•
The connection plate resp. the stand for the brake as well as the brake disk must be inspected for dimensional
accuracy. For that purpose inspect the connection dimensions, connection surfaces and tolerances as spe-
cified in the drawing (see illustrations 1 and 2).
•
Clean and degrease the brake disk and mounting surfaces. Dirt can easily be removed by means of solvents.
The connection between connection plate or stand and brake is defined to be frictionally
engaged. Any residues of oil, dirt and corrosion protection reduce the coefficient of friction.
As a result the operation of the brake and the full braking power are no longer ensured.
!
Observe the manufacturer’s instructions regarding the use of solvents.
4
Assembly
4.1 Components of the brake
4.2 Preparation of assembly
