CLAMPEX
®
KTR 620
Operating/Assembly instructions
KTR-N
Sheet:
Edition:
40822 EN
7 of 11
9
Please observe protection
note ISO 16016.
Drawn:
2019-07-17 Wih/Jh
Replacing:
KTR-N dated 2017-05-17
Verified:
2019-07-18 Shg
Replaced by:
You may only assemble and disassemble the clamping set if you
•
have carefully read through the operating/assembly instructions and understood them
•
had technical training
•
are authorized by your company
The clamping set may only be used in accordance with the technical data (see table 1). Unauthorized modifica-
tions on the clamping set are not admissible. We will not assume liability for any damage that may arise. In the
interest of further development we reserve the right for technical modifications.
The clamping set described in here corresponds to the technical status at the time of printing of these operat-
ing/assembly instructions.
The clamping sets are supplied in preserved condition and can be stored at a dry and roofed place for 6 - 9
months.
!
Humid storage rooms are not suitable.
Please make sure that condensation is not generated.
!
In order to avoid any injuries and any kind of damage please always make use of proper
transport and lifting equipment.
The clamping sets are packed differently each depending on size, quantity and kind of transport. Unless other-
wise contractually agreed, packaging will follow the in-house packaging specifications of KTR.
Generally the clamping set is supplied in mounted condition. Before assembly the clamping set has to be inspect-
ed for completeness
2
Advice
2.3 Intended use
3
Storage, transport and packaging
3.1 Storage
3.2 Transport and packaging
4
Assembly
