MotorCycle Alarm
by
SIGNALS
If various alarms have been triggered, the memory will signal them in a sequence with 3 second
pauses and will repeat the sequence every 6 seconds.
The memory is reset when the motorcycle is started up or when the alarm system is armed
with the remote control again.
The acoustic signal emitted when the alarm is armed and disarmed fails to comply with the national
norms in Germany and must therefore be disabled.
10
S
TATUS OF CENTRAL UNIT
LED
D
IRECTION
I
NDICATORS
S
IREN
Passive arming (only if programmed)
Slow flashing
1 short flash
1 B
EEP
Arming by remote control
Flashing
2 flashes
2 B
EEP
Arming without internal lift and tilt sensor
On fixed during initial immunity phase
flashes 2 + 1
B
EEP
2 + 1
Arming with open contact
Flashing
2 flashes 2 B
EEP
-1 B
OOP
Initial immunity phase
Reversed flashing
Testing during the initial immunity phase
Reversed flashing
1 B
EEP
Central unit armed
Flashing
Alarm cycles
Flashing
lampeggianti
Sounds
Disarming without alarms
Switches off
1 flash
1 B
EEP
Disarming when the motorcycle’s battery is flat
Switches off
4 B
EEP
Disarming when alarms have been memorised
Switches off briefly every 6 sec.
1 B
EEP
- 1 B
OOP
M
EMORISED ALARMS
LED
SIGNALS
Internal movement sensor
1 flash
Contacts
2 flashes
Ignition sensing
3 flashes
Tampering with cables or battery
4 flashes
EN
EN
BUTTON B
BUTTON A
DEF•COM T
V81548A Is.Uso Def-Com3 KTM 23-11-2006 16:28 Pagina 10
