KTM Freeride E-XC NG 2018, Руководство пользователя

Страница: 96 / 151

15 WHEELS, TIRES
94
H00937-10
Main work
–
Check the wheel bearing for damage and wear.
» If the wheel bearing is damaged or worn:
–
Change the rear wheel bearing.
–
Clean and grease the shaft seal rings
1
and contact sur-
face
A
of the spacers.
Long-life grease ( p. 139)
–
Insert the spacers.
C00737-10
–
Position the rear wheel.
The brake linings are correctly positioned.
–
Insert wheel spindle
2
.
–
Put the chain on.
C00707-11
–
Position chain adjuster
3
. Mount nut
4
, but do not tighten
it yet.
–
Make sure that chain adjusters
3
are fitted correctly on
adjusting screws
5
.
–
Check the chain tension. ( p. 73)
–
Tighten nut 4 .
Guideline
Nut, rear wheel spin-
dle M20x1.5 80 Nm (59 lbf ft)
Info
The wide adjustment range of the chain adjusters
enables different secondary ratios with the same chain
length.
Chain adjusters
3
can be turned by 180°.
–
Operate the rear brake lever several times until the brake lin-
ings are in contact with the brake disc and there is a pressure
point.
Finishing work
–
Remove the motorcycle from the lift stand. ( p. 57)
–
Install the KTM PowerPack. ( p. 108)
–
Lock the seat. ( p. 69)