KTM Freeride 250 R EU, Руководство пользователя

Страница: 35 / 115

11 TUNING THE CHASSIS
33
Info
Turn clockwise to increase damping; turn counterclockwise to reduce damp-
ing.
11.6 Measuring rear wheel sag unloaded
Preparatory work
–
Raise the motorcycle with the lift stand. ( p. 38)
400988-10
Main work
–
Measure the distance
–
as vertical as possible
–
between the rear axle and a fixed
point, for example, a mark on the rear fairing.
–
Note down the value as dimension

.
Finishing work
–
Remove the motorcycle from the lift stand. ( p. 38)
11.7 Checking the static sag of the shock absorber
400989-10
–
Measure distance

of rear wheel unloaded. ( p. 33)
–
Hold the motorcycle upright with the aid of an assistant.
–
Measure the distance between the rear axle and the fixed point again.
–
Note down the value as dimension  .
Info
The static sag is the difference between measurements

and

.
–
Check the static sag.
Static sag 15 mm (0.59 in)
» If the static sag is less or more than the specified value:
–
Adjust the spring preload of the shock absorber. ( p. 34)