12 SERVICE WORK ON THE CHASSIS
82
101955-10
Main work
–
Remove screws
1
.
–
Take off silencer cap
2
with O-ring
3
.
–
Remove old glass fiber yarn filling.
–
Clean the parts that need to be reinstalled and check for dam-
age.
–
Fit new glass fiber yarn filling
4
into the main silencer.
–
Mount the O-ring on the silencer cap.
–
Position the silencer cap.
–
Mount and tighten all of the screws.
Guideline
Screws on the main
silencer
M5
7 Nm (5.2 lbf ft)
Finishing work
–
Install the main silencer. (
12.33
Removing the fuel tank
Danger
Fire hazard
Fuel is highly flammable.
The fuel in the fuel tank expands when warm and can escape if overfilled.
–
Do not refuel the vehicle in the vicinity of open flames or lit cigarettes.
–
Switch off the engine for refueling.
–
Make sure that no fuel is spilled; particularly not on hot parts of the vehicle.
–
If any fuel is spilled, wipe it off immediately.
–
Observe the specifications for refueling.
Warning
Danger of poisoning
Fuel is poisonous and a health hazard.
–
Avoid skin, eye and clothing contact with fuel.
–
Immediately consult a doctor if you swallow fuel.
–
Do not inhale fuel vapors.
–
In case of skin contact, rinse the affected area with plenty of water.
–
Rinse the eyes thoroughly with water, and consult a doctor in case of fuel contact with the eyes.
–
Change your clothing in case of fuel spills on them.
–
Keep fuels correctly in a suitable canister, and out of the reach of children.
Preparatory work
–
Remove the seat. (
