11 TUNING THE CHASSIS
61
M00987-11
(EXC
‑
F Six Days)
–
Remove screws
1
. Take off the handlebar clamps.
Remove the handlebar and lay it to one side.
Info
Cover the components to protect them against dam-
age.
Do not kink the cables and lines.
–
Remove screws
2
. Take off the handlebar supports.
–
Place the handlebar supports in the required position.
Mount and tighten screws
2
.
Guideline
Screw, handle-
bar holder
M10
40 Nm (29.5 lbf ft)
Loctite
®
243™
Info
Position the left and right handlebar supports
evenly.
–
Position the handlebar.
Info
Make sure the cables and wiring are positioned cor-
rectly.
–
Position the handlebar clamps. Mount screws
1
and
tighten evenly.
Guideline
Screw, handlebar
clamp
M8
20 Nm
(14.8 lbf ft)
Info
Make sure the gap widths are even.
