2 SETUP
6
H03807-10
–
Make sure that the clutch cable is attached to the clutch
release lever and secured.
–
Check the clutch lever play. (
–
Carefully loosen and remove the tension belt over the link fork.
Info
An assistant prevents the motorcycle from falling over.
–
Carefully loosen and remove the tension belts around the lower
triple clamp.
The vehicle is released at the front.
–
Together with an assistant, take the vehicle off the pallet.
–
Remove the passenger seat. (
S04209-01
–
Take the tool set out of the separate enclosure and store it in
the storage compartment under the passenger seat using the
rubber straps provided in the tool set.
–
Remove the front rider's seat. (
–
Remove spare key and
KEYCODECARD
from under the seat and
keep in a safe place for the handover.
Warning
Risk of injury
Battery acid and battery gases cause
serious chemical burns.
–
Keep 12 V batteries out of the reach of children.
–
Wear suitable protective clothing and safety
glasses.
–
Avoid contact with battery acid and battery gases.
–
Keep sparks or open flames away from the 12 V
battery.
–
Only charge 12 V batteries in well-ventilated
rooms.
–
Rinse the affected area immediately with plenty of
water in the event of contact with the skin.
–
Rinse eyes with water for at least 15 minutes and
consult a doctor immediately if battery acid and
battery gases get into the eyes.
–
Fill the 12 V battery.
Info
Read the notes in the 12 V battery accessory pack.
–
Charge the 12-V battery. (
Guideline
The 12-V battery must be fully charged before it is handed
over to the customer.
Info
The first charging process may take longer with a new
12-V battery.
–
Install the 12-V battery. (
Содержание F5303V5
Страница 1: ...SETUP INSTRUCTIONS 2022 390 ADVENTURE Art no 3214692en...
Страница 2: ......