KTM F5303R1, Руководство пользователя

Страница: 226 / 269

20 CLEANING, CARE
224
–
After cleaning, ride the vehicle a short distance until the
engine warms up.
Info
The heat produced causes water at inaccessible loca-
tions in the engine and on the brake system to evapo-
rate.
–
Push back the sleeves of the handlebar controls to allow any
water that has penetrated to evaporate.
–
After the motorcycle has cooled off, lubricate all moving parts
and pivot points.
–
Clean the chain. ( p. 122)
–
Treat bare metal (except for brake discs and the exhaust sys-
tem) with a corrosion inhibitor.
Preserving materials for paints, metal and rubber
(
p. 256)
–
Treat all painted parts with a mild paint care product.
Perfect Finish and high gloss polish for paints ( p. 256)
Info
Do not polish parts that were matte when delivered as
this would strongly impair the material quality.