KTM 990 SupermotoR, Руководство пользователя

Страница: 151 / 208

COOLING SYSTEM
149
0 0 A A
400677-10
–
Position the vehicle as shown and secure it against rolling. Height difference

must
be reached.
Guideline
Height difference

50 cm (19.7 in)
Info
To make sure that all of the air can escape from the cooling system, raise the
front of the vehicle. A poorly bled cooling system is less effective at cooling and
the engine can overheat.
101162-10
–
Remove the radiator cap and pour in coolant until it emerges without bubbles at the
vent hole, and then immediately mount and tighten the bleeder screw

.
Alternative 1
Coolant ( p. 194)
Alternative 2
Coolant (mixed ready to use) ( p. 194)
–
Fill the radiator completely with coolant. Mount the radiator cap.
–
Lean the vehicle on the side stand.
–
Check the coolant level in the compensating tank. ( p. 145)
Danger
Danger of poisoning Exhaust gases are poisonous and inhaling them may result
in unconsciousness and/or death.
–
When running the engine, always make sure there is sufficient ventilation,
and do not start or run the engine in an enclosed space without an effective
exhaust extraction system.
–
Start the engine and run it until it reaches operating temperature.