KTM 990 Adventure 2009, Руководство пользователя

Страница: 164 / 213

MAINTENANCE WORK ON CHASSIS AND ENGINE
162
Info
For optimal performance of the engine oil, do not mix different types of engine
oil.
We recommend changing the engine oil, if necessary.
–
Replace the oil dipstick.
9.87
Ignition curve plug-in connector
100554-10
Plug-in connector

is located under the seat close to where the top of the shock absorber
is attached.
By disconnecting the plug-in connector, the ignition curve for fuel with an octane rating
below 95 (ROZ 95 / RON 95 / PON 91) is activated. While the engine will have a slightly
lower power output, this setting prevents engine damage by hindering spark knocking due
to poor fuel quality.
Possible states
• Plug-in connector disconnected
–
Fuel with an octane rating of 80 to 94 (RON) can be
used for one tank full.
• Plug-in connector connected
–
Fuel with an octane rating of 95 or higher can be used.
9.88
Adjusting the ignition curve to the fuel quality
–
Switch off the ignition by turning the black ignition key to the position .
–
Remove the seat. ( p. 67)
To activate the ignition curve for low octane fuel:
Note
Engine damage Low-quality fuel damages the engine.
–
Operate the vehicle with fuel with an octane rating below 95 (ROZ 95 / RON 95 / PON 91) for no more than one tank full.
–
The ignition curve must be adjusted to low octane fuel.