KTM 890 DUKE R 2022, Инструкции по установке

Страница: 12 / 26

2 SETUP
10
–
Tighten all the screws of the right footrest bracket with the
passenger footrest.
Guideline
Screw, footrest
bracket, rear M8x40 25 Nm (18.4 lbf ft)
Loctite ® 243™
Screw, footrest
bracket, rear M8x25 25 Nm (18.4 lbf ft)
Loctite ® 243™
Remaining
screws, chassis M8 25 Nm (18.4 lbf ft)
–
Carefully loosen and remove the rear tension belt.
Info
An assistant prevents the motorcycle from falling over.
–
Carefully loosen and remove the tension belts around the fork
legs.
The vehicle is released at the front.
–
Together with an assistant, take the vehicle off the pallet.
–
Remove the passenger seat. ( p. 12)
–
Remove the spare key and KEYCODECARD keep in a safe place
for the handover.
Warning
Risk of injury
Battery acid and battery gases cause
serious chemical burns.
–
Keep 12 V batteries out of the reach of children.
–
Wear suitable protective clothing and safety
glasses.
–
Avoid contact with battery acid and battery gases.
–
Keep sparks or open flames away from the 12 V
battery.
–
Only charge 12 V batteries in well-ventilated
rooms.
–
Rinse the affected area immediately with plenty of
water in the event of contact with the skin.
–
Rinse eyes with water for at least 15 minutes and
consult a doctor immediately if battery acid and
battery gases get into the eyes.
–
Fill the 12 V battery.
Info
Read the notes in the 12 V battery accessory pack.
–
Charge the 12-V battery. ( p. 13)
Guideline
The 12-V battery must be fully charged before it is handed
over to the customer.