KTM 85 SX 17/14, Руководство пользователя

Страница: 52 / 96

11 SERVICE WORK ON THE CHASSIS
50
C00482-10
Main work
–
Check the routing of the throttle cable.
The throttle cable must be routed to the carburetor on the left side above the
fuel tank bracket.
» If the throttle cable is not routed as specified:
–
Correct the routing of the throttle cable.
Finishing work
–
Install the fuel tank.
x
( p. 45)
–
Mount the seat. ( p. 40)
11.42 Checking the rubber grip
401197-01
–
Check the rubber grips on the handlebar for damage and wear and to ensure they
are firmly seated.
» If a rubber grip is damaged, worn or loose:
–
Change and secure the rubber grip.
Rubber grip adhesive (00062030051) ( p. 89)
11.43 Additionally securing the rubber grip
Preparatory work
–
Check the rubber grip. ( p. 50)
401198-01
Main work
–
Secure the rubber grip at two points using the securing wire.
Securing wire (54812016000)
Wire twister forceps (U6907854)
The twisted wire ends face away from the hands and are bent toward the rub-
ber grip.
11.44 Adjusting the basic position of the clutch lever
C00258-10
–
Adjust the basic position of the clutch lever to the size of the rider's hand using
adjusting screw
1
.
Info
Turn the adjusting screw clockwise to increase the distance between the
clutch lever and the handlebar.
Turn the adjusting screw counterclockwise to decrease the distance between
the clutch lever and the handlebar.
The range of adjustment is limited.
Turn the adjusting screw by hand only, and do not apply force.
Do not make any adjustments while riding!