KTM 85 SX 17/14 2022, Руководство пользователя

Страница: 98 / 182

14 COOLING SYSTEM
96
V00832-11
Main work
–
Make sure that screw
1
is tightened.
–
Position the motorcycle upright.
–
Take off radiator cap
2
.
–
Completely fill the radiator with coolant.
Coolant ( p. 123)
V00870-10
–
Loosen screw
3
until coolant escapes without bubbles.
–
Mount and tighten screw
3
.
Guideline
Screw, radiator
bleeding M6 8 Nm (5.9 lbf ft)
–
Completely fill the radiator with coolant.
Coolant ( p. 123)
–
Mount radiator cap
2
.
Danger
Danger of poisoning Exhaust gases are toxic and inhal-
ing them may result in unconsciousness and death.
–
Always make sure there is sufficient ventilation
when running the engine.
–
Use effective exhaust extraction when starting or
running the engine in an enclosed space.
–
Allow the engine to warm up and cool down again.
–
Check the coolant level. ( p. 94)
Finishing work
–
Check the cooling system for leaks.
14.9 Changing the coolant
Warning
Danger of scalding During motorcycle operation, the coolant gets very hot and is under pressure.
–
Do not open the radiator, the radiator hoses or other cooling system components if the engine or the
cooling system are at operating temperature.
–
Allow the cooling system and the engine to cool down before you open the radiator, the radiator hoses
or other components of the cooling system.
–
In the event of scalding, rinse the area affected immediately with lukewarm water.