ENGLISH
4
1
2
3
4
4
4
1
1
5
A
3
3
2
2
A
Preassembly
- Remove the headlight mask with the headlight (see the Owner’s Manual).
Assembly
- Stick the shim strips
(4)
onto the headlight protector
(1)
.
Scope of supply:
1x headlight protector
(1)
2x special screws M5x17
(2)
69008021060
2x well nuts M5
(3)
60008008050
2x shim strips 11x3
(4)
- Correctly position the headlight protector
(1)
on the headlight mask
(5)
.
- With a non-permanent pen or pencil, mark the position of the holes
(A)
of
the headlight protector on the headlight mask.
- In the center of each marking, drill a hole with a diameter of 9.5 mm.
- Insert the well nuts
(3)
into the drilled holes from the front.
- Attach the headlight protector to the headlight mask with the screws
(2)
.
Finishing work
- Mount the headlight mask with the headlight (see the Owner’s Manual).
