KTM 690 Enduro R USA страница 104 Скачать руководство пользователя

Страница: 104 / 207

BRAKE SYSTEM

102

B01959-01

–

Check the brake linings for minimum thickness



Minimum thickness



≥

1 mm (

≥

0.04 in)

» If the minimum thickness is less than specified:

–

Change the front brake linings.

(

p. 102)

–

Check the brake linings for damage and cracking.
» If there is wear or tearing:

–

Change the front brake linings.

(

p. 102)

12.7

Changing the front brake linings

Warning

Danger of accident

Brake system failure.

–

Maintenance work and repairs must be carried out professionally. (Your authorized KTM workshop will be glad to help.)

Warning

Skin irritation

Brake fluid can cause skin irritation on contact.

–

Avoid contact with skin and eyes, and keep out of the reach of children.

–

Wear suitable protective clothing and goggles.

–

If brake fluid comes into contact with the eyes, flush the eyes thoroughly with water and consult a physician immediately.

Warning

Danger of accidents

Reduced braking efficiency due to old brake fluid.

–

Change the brake fluid of the front and rear brake according to the service schedule. (Your authorized KTM workshop will be
glad to help.)

Содержание 690 Enduro R USA
















































































































































































































Результаты поиска

Содержание 690 Enduro R USA

Отзывы:

Похожие инструкции для 690 Enduro R USA

Бренды по названию

Популярные бренды

KTM 690 Enduro R USA, Руководство пользователя

Результаты поиска

Содержание 690 Enduro R USA

Отзывы:

Похожие инструкции для 690 Enduro R USA

Бренды по названию

Популярные бренды