KTM 690 Enduro R USA 2013, Руководство пользователя

Страница: 173 / 208

20 TROUBLESHOOTING
171
Faults Possible cause Action
The engine does not turn when the
starter button is pressed Operating error
–
Carry out the start procedure. ( p. 52)
Battery is discharged
–
Recharge the battery. x ( p. 130)
Fuse 1 , 2 , 3 or 4 is blown
–
Change the fuses of individual power consumers.
( p. 134)
Main fuse burned out
–
Change the main fuse. ( p. 133)
No ground connection present
–
Check the ground connection.
Engine turns only if the clutch lever is
drawn The vehicle is in gear
–
Shift gear to neutral.
The vehicle is in gear and the side
stand is folded out
–
Shift gear to neutral.
Engine turns but does not start. Operating error
–
Carry out the start procedure. ( p. 52)
Fuse 4 blown
–
Change the fuses of individual power consumers.
( p. 134)
Coupling of fuel hose connection not
connected
–
Reconnect coupling of fuel hose connection.
Defect in fuel injection system
–
Read out the fault memory using the KTM diag-
nostics tool.
x
Engine has too little power. Air filter is very dirty
–
Remove the air filter. x ( p. 85)
–
Install the air filter. x ( p. 86)
Fuel filter is very dirty
–
Check the fuel pressure. x
Defect in fuel injection system
–
Read out the fault memory using the KTM diag-
nostics tool.
x
Engine overheats. Too little coolant in cooling system
–
Check the cooling system for leakage.
–
Check the coolant level. ( p. 147)
Radiator fins very dirty
–
Clean radiator fins.