KTM 690 DUKE R EU Скачать руководство пользователя

Страница: 135 / 179

SERVICE WORK ON THE ENGINE

133

17.1

Checking the engine oil level

Info

The engine oil level must be checked at normal engine operating temperature.

Condition

The engine is at operating temperature.

602585-10

–

Stand the motorcycle upright on a horizontal surface.

–

Check the engine oil level.

Info

After switching off the engine, wait one minute before checking the level.

The engine oil must be between the lower and upper edge of the oil level viewer.

» If the engine oil level is not at the specified level:

–

Add the engine oil. (

p. 138)

17.2

Changing the engine oil and filter, cleaning the oil screens

Warning

Danger of scalding

Engine oil and gear oil get very hot when the motorcycle is ridden.

–

Wear appropriate protective clothing and safety gloves. In case of burns, rinse immediately with lukewarm water.

Warning

Environmental hazard

Hazardous substances cause environmental damage.

–

Oil, grease, filters, fuel, cleaners, brake fluid, etc., should be disposed of as stipulated in applicable regulations.

Содержание 690 DUKE R EU




















































































































































































Результаты поиска

Содержание 690 DUKE R EU

Отзывы:

Похожие инструкции для 690 DUKE R EU

Бренды по названию

Популярные бренды

KTM 690 DUKE R EU, Руководство пользователя

Результаты поиска

Содержание 690 DUKE R EU

Отзывы:

Похожие инструкции для 690 DUKE R EU

Бренды по названию

Популярные бренды