KTM 690 DUKE R EU, Руководство пользователя

Страница: 101 / 179

13 WHEELS, TIRES
99
M00668-10
–
Engage the counter bearing of brake caliper support

and the swingarm.
–
Lift the rear wheel into the swingarm, position it, and insert the wheel spindle.
The brake linings are correctly positioned.
–
Place the chain on the sprocket.
–
Position chain adjuster

. Mount nut

, but do not tighten it yet.
Info
Mount the left and right chain adjusters in the same position.
–
Make sure that chain adjusters

are fitted correctly on the adjusting screws. Tighten
nut

.
Guideline
In order for the rear wheel to be correctly aligned, the markings on the left and right
chain adjusters must be in the same position relative to the reference marks

.
Nut, rear wheel spindle M25x1.5 90 Nm
(66.4 lbf ft)
–
Position wheel speed sensor

in the drill hole. Mount and tighten screw

.
Guideline
Remaining screws, chassis M6 10 Nm (7.4 lbf ft)
–
Operate the foot brake lever repeatedly until the brake linings are in contact with the
brake disc and there is a pressure point.
Finishing work
–
Take the motorcycle off of the rear wheel stand. ( p. 68)
–
Check the chain tension. ( p. 73)