KTM 690 Duke 2018, Инструкции по установке

Страница: 5 / 20

SETUP 2
3
2.1 Unpacking and setting up the vehicle
E00601-01
–
Remove the box and the plastic packaging.
Info
To avoid damaging the motorcycle while mounting the
handlebar, leave the film on the fuel tank until all of
the work on the motorcycle has been finished.
–
Check the vehicle for transport damage.
–
Unpack the separate enclosure and check its contents on the
basis of the enclosure list.
(690 Duke US)
–
Ensure that the reflector is mounted on the license plate
holder.
E00602-01
–
Remove the controls from the transport holder. Remove the
screws and handlebar clamps. Remove the transport holder.
K00451-01
–
Remove the right-hand handlebar weight.
–
Position the controls on the right half of the handlebar.
Tighten the screws.
Guideline
Screw, throttle grip M5 3.5 Nm
(2.58 lbf ft)
E00174-10
Warning
Danger of accidents A repaired handlebar poses a
safety risk.
If the handlebar is bent or straightened, the mate-
rial becomes fatigued. The handlebar may break as a
result.
–
Change the handlebar if the handlebar is damaged
or bent.
–
Position the handlebar.
Info
Make sure the cables and wiring are positioned cor-
rectly.
–
Position the handlebar clamps. Mount and tighten the screws
evenly.