KTM 690 Duke 2018, Инструкции по установке

Страница: 7 / 20

SETUP 2
5
–
Carefully loosen and remove the tension belts around the lower
triple clamp.
The vehicle is released at the front.
–
Together with an assistant, take the vehicle off the pallet.
–
Remove the radiator shield.
–
Remove the passenger seat. ( p. 6)
–
Remove the spare key and KEYCODECARD and keep in a safe
place for the handover.
–
Secure the tool set with rubber holders under the passenger
seat.
Warning
Risk of injury Battery acid and battery gases cause
serious chemical burns.
–
Keep batteries out of the reach of children.
–
Wear suitable protective clothing and safety
glasses.
–
Avoid contact with battery acid and battery gases.
–
Keep sparks or open flames away from the battery.
–
Only charge batteries in well-ventilated rooms.
–
Rinse the affected area immediately with plenty of
water in the event of contact with the skin.
–
Rinse eyes with water for at least 15 minutes and
consult a doctor immediately if battery acid and
battery gases get into the eyes.
–
Fill the battery.
Info
Read the notes in the battery package.
–
Recharge the battery. ( p. 6)
–
Install the battery. ( p. 8)
–
Refuel. ( p. 10)
–
Check the headlight setting. ( p. 12)
–
Prepare the vehicle according to the specifications in the
KTM Dealer.net for handover to the customer.
–
Set the kilometers or miles. ( p. 10)