KTM 450 XC Скачать руководство пользователя страница 171

Страница: 171 / 208

MAINTENANCE ON CHASSIS AND ENGINE

169

600132-10

–

Remove the screw cap



on the clutch cover and fill up with engine oil.

Engine oil

2.00 l (2.11 qt.)

External
temperature:

≥

0 °C (

≥

32 °F)

Engine oil
(SAE 10W/50)

(

p. 195)

External
temperature:
< 0 °C (< 32 °F)

Engine oil (SAE
5W/40) (

p. 195)

–

Mount and tighten screw cap



Danger

Danger of poisoning

Exhaust gases are poisonous and can result in

unconsciousness and/or death.

–

When running the engine, always make sure there is sufficient ventilation,
and do not start or run the engine in a closed space.

–

Start the engine and check that it is oil-tight.
Guideline

Switch off the engine when the radiator fan switches on.

–

Check the engine oil level. (

p. 162)

9.93

Topping up engine oil

Info

Too little engine oil or poor-quality engine oil results in premature wear to the engine.

Содержание 450 XC

















































































































































































































Результаты поиска

Содержание 450 XC

Отзывы:

KTM 450 XC, Руководство пользователя, Страница: 171 / 208

Результаты поиска

Содержание 450 XC

Отзывы: