
WORK
7
–
Switch off all power-consuming components and switch off the engine.
–
Remove the rear fender. (
–
Disconnect the minus (negative) cable of the battery to avoid damage to the vehi-
cle's electronics.
100087-10
–
Connect the battery charger to the battery. Switch on the battery charger.
Battery charger (58429074000)
You can also use the battery charger to test rest potential and start potential of the
battery, and to test the generator. With this device, you cannot overcharge the bat-
tery.
Info
Never remove the lid
.
Charge the battery according to the instructions
on the battery casing.
–
Switch off the charger after charging. Disconnect the battery.
Guideline
The charge current, charge voltage and charge time must not be exceeded.
Charge the battery regularly when the
vehicle is not in use.
3 months
–
Install the rear fender. (
3.7
Installing the battery
300279-11
–
Place the battery in the battery holder.
4Ah battery (YTX5L-BS)
–
Reconnect rubber band
.
–
Attach the positive (plus) cable and replace the plus pole cover
.
–
Connect the negative (minus) cable
of the battery.
–
Install the rear fender. (
3.8
Opening filler cap
100012-10
–
Press release button
, turn filler cap counterclockwise and lift it free.
3.9
Closing filler cap
100012-11
–
Replace the filler cap and turn clockwise until the release button
locks in place.
–
Check the fuel tank breather
to ensure it is properly seated.
» If the fuel tank breather is at an angle or loose:
–
Correctly mount the fuel tank breather.
Содержание 450 SX ATV 2009
Страница 1: ...SETUP INSTRUCTIONS 2009 450 SX ATV 505 SX ATV ART NO 3211428en ...
Страница 2: ......
Страница 12: ...SUBSTANCES 10 Super unleaded ROZ 95 RON 95 PON 91 According to DIN EN 228 ROZ 95 RON 95 PON 91 ...
Страница 13: ... 3211428en 3211428en KTM Sportmotorcycle AG 5230 Mattighofen Austria http www ktm com 7 2008 Photo Mitterbauer ...