
WORK
5
3.3
Mounting the seat
100046-10
–
Hook slot
on the seat into collar sleeve
of the fuel tank, lower the rear of the
seat and slide tab
under fuel tank
.
100043-10
–
Push down the rear of the seat until release hook
engages.
–
Make sure that the seat is correctly locked in.
3.4
Removing the rear fender
–
Remove the seat (
300254-10
–
Remove screws
.
300255-10
–
Raise the rear of the air filter box lid
. At the same time, use your other hand to
press on the carburetor connection boot to kink it at that location. This prevents the
carburetor connection boot from disconnecting from the carburetor.
–
Raise fender
at the rear and remove it.
Содержание 450 SX ATV 2009
Страница 1: ...SETUP INSTRUCTIONS 2009 450 SX ATV 505 SX ATV ART NO 3211428en ...
Страница 2: ......
Страница 12: ...SUBSTANCES 10 Super unleaded ROZ 95 RON 95 PON 91 According to DIN EN 228 ROZ 95 RON 95 PON 91 ...
Страница 13: ... 3211428en 3211428en KTM Sportmotorcycle AG 5230 Mattighofen Austria http www ktm com 7 2008 Photo Mitterbauer ...