KTM 450 SMR, Руководство пользователя, Страница: 34 / 100

11 SERVICE WORK ON THE CHASSIS
32
11.6 Installing the fork legs
x
L01264-10
Main work
–
Position the fork legs.
Info
Grooves are milled into the side of the upper end of the fork legs. The sec-
ond milled groove (from the top) must be flush with the top edge of the
upper triple clamp.
Position bleeder screws
1
toward the front.
L01272-11
–
Tighten screws
2
.
Guideline
Screw, top triple clamp M8 17 Nm
(12.5 lbf ft)
–
Tighten screws
3
.
Guideline
Screw, bottom triple clamp M8 12 Nm (8.9 lbf ft)
L01271-11
–
Position the brake line and clamp. Mount and tighten screws
4
.
Finishing work
–
Install the front wheel.
x
( p. 60)
11.7 Removing the fork protector
L01273-11
–
Remove screws
1
and take off the clamp.
–
Remove screws
2
on the left fork leg. Take off the fork protector.
–
Remove screws on the right fork leg. Take off the fork protector.
11.8 Installing the fork protector
L01273-10
–
Position the fork protector on the left fork leg. Mount and tighten screws
1
.
Guideline
Remaining screws, chassis M6 10 Nm (7.4 lbf ft)
–
Position the brake line and clamp. Mount and tighten screws
2
.
–
Position the fork protector on the right fork leg. Mount and tighten the screws.
Guideline
Remaining screws, chassis M6 10 Nm (7.4 lbf ft)