KTM 390 DUKE 2017 Скачать руководство пользователя страница 143

Страница: 143 / 255

13 BRAKE SYSTEM

141

Warning

Skin irritation

Brake fluid causes skin irritation.

–

Keep brake fluid out of the reach of children.

–

Wear suitable protective clothing and safety glasses.

–

Do not allow brake fluid to come into contact with the skin, the eyes or clothing.

–

Consult a doctor immediately if brake fluid has been swallowed.

–

Rinse the affected area with plenty of water in the event of contact with the skin.

–

Rinse eyes thoroughly with water immediately and consult a doctor if brake fluid comes into contact
with the eyes.

–

If brake fluid spills on to your clothing, change the clothing.

Warning

Danger of accidents

Old brake fluid reduces the braking effect.

–

Make sure that brake fluid for the front and rear brake is changed in accordance with the service
schedule. (Your authorized KTM workshop will be glad to help.)

Warning

Environmental hazard

Hazardous substances cause environmental damage.

–

Dispose of oils, grease, filters, fuel, cleaning agents, brake fluid, etc., correctly and in compliance with
the applicable regulations.

Содержание 390 DUKE 2017
































































































































































































































































Результаты поиска

Содержание 390 DUKE 2017

Отзывы:

Похожие инструкции для 390 DUKE 2017

Бренды по названию

Популярные бренды

KTM 390 DUKE 2017, Руководство пользователя

Результаты поиска

Содержание 390 DUKE 2017

Отзывы:

Похожие инструкции для 390 DUKE 2017

Бренды по названию

Популярные бренды