KTM 350 EXC-F 2017, Руководство пользователя

Страница: 106 / 129

18 SERVICE WORK ON THE ENGINE
104
K00570-10
–
Mount and tighten screw plug

with the O-ring.
Guideline
Screw plug, oil screen M20x1.5 15 Nm
(11.1 lbf ft)
–
Mount and tighten oil drain plug

with the magnet and a new seal ring.
Guideline
Oil drain plug with magnet M12x1.5 20 Nm
(14.8 lbf ft)
K00571-10
–
Remove screws

. Remove the oil filter cover with the O-ring.
K00572-10
–
Pull oil filter

out of the oil filter housing.
Circlip pliers reverse (51012011000)
–
Completely drain the engine oil.
–
Thoroughly clean the parts and sealing surface.
K00573-10
–
Lay the motorcycle on its right side and fill the oil filter housing approx.
⅓
full with
engine oil.
–
Place the oil filter into the oil filter housing.
–
Oil the O-ring of the oil filter cover and mount it with oil filter cover

.
–
Mount and tighten the screws.
Guideline
Screw, oil filter cover M6 10 Nm (7.4 lbf ft)
–
Stand the motorcycle upright.
401955-12
–
Remove filler plug  with the O-ring from the clutch cover and fill up with engine
oil.
Engine oil 1.0 l (1.1 qt.) Engine oil (SAE 10W/50) ( p. 117)
Alternative engine
oil for harsh oper-
ating conditions
and increased per-
formance Engine oil
(SAE 10W/60)
(00062010035)
( p. 117)
Info
Too little engine oil or poor-quality engine oil results in premature wear of
the engine.
–
Install and tighten the oil filler plug with O-ring.
Danger
Danger of poisoning Exhaust gases are toxic and inhaling them may result
in unconsciousness and death.
–
Always make sure there is sufficient ventilation when running the
engine.
–
Use an effective exhaust extraction system when starting or running the
engine in an enclosed space.