KTM 250 EXC-F AUS, Руководство пользователя

Страница: 45 / 117

SERVICE WORK ON THE CHASSIS
43
–
Press the dust boots back into their normal position.
–
Remove excess oil.
–
Position the fork protection. ( p. 43)
–
Remove the motorcycle from the lift stand. ( p. 42)
10.5
Loosening the fork protector
600875-11
–
Remove screws

and remove the clamp.
–
Remove screws

on the left fork leg. Push the fork protector downwards.
–
Remove the screws on the right fork leg. Push the fork protector downwards.
10.6
Positioning the fork protection
600875-10
–
Position the fork protection on the left fork leg. Mount and tighten screws

.
Guideline
Remaining screws, chassis M6 10 Nm (7.4 lbf ft)
–
Position the wiring harness.
–
Position the brake line. Put the clamp on, mount and tighten screws

.
–
Position the fork protection on the right fork leg. Mount and tighten the screws.
Guideline
Remaining screws, chassis M6 10 Nm (7.4 lbf ft)
10.7
Removing the fork legs
–
Remove the headlight mask with the headlight. ( p. 78)
–
Remove front wheel.
x
( p. 71)
100802-10
–
Remove screws

and take off the clamp.
–
Remove cable clip

.
–
Remove screws

and take off the brake caliper.
–
Hang the brake caliper and the brake line loosely to the side.
100887-10
(EXC
‑
F EU/AUS)
–
Loosen screws

. Remove the fork leg on the left.
–
Loosen screws

. Remove the fork leg on the right.
601159-10
(EXC
‑
F Factory Edition, EXC
‑
F SIX DAYS, XCF
‑
W SIX DAYS)
–
Loosen screws

. Remove the fork leg on the left.
–
Loosen screws

. Remove the fork leg on the right.