KTM 250 EXC-F AUS 2012, Инструкции по установке

Страница: 11 / 18

WORK
9
3.6
Installing the front fender
101345-10
–
Ensure that the spacers are mounted in the fender.
–
Position the front fender. Mount and tighten screws
1
.
Guideline
Remaining screws, chassis M6 10 Nm (7.4 lbf ft)
Info
Make sure the holding lugs engage in the start number plate or headlight
mask.
3.7
Removing the seat
101346-10
–
Remove screw
1
.
–
Lift up the seat at the rear, pull it back and then remove it from above.
3.8
Mounting the seat
101347-01
–
Hook in the front of the seat at the collar sleeve of the fuel tank, lower it at the rear
and simultaneously push it forward.
–
Make sure that the seat is correctly locked in.
–
Mount and tighten the screw of the seat fixing.
Guideline
Remaining screws, chassis M6 10 Nm (7.4 lbf ft)
3.9
Installing the battery
101394-10
Main work
–
Insert battery into the battery compartment with the terminals facing to the front.
Battery (YTX4L-BS)
–
Reconnect rubber band
1
.
–
Connect positive cable
2
and negative cable
3
.
Guideline
Screw, battery terminal M5 2.5 Nm
(1.84 lbf ft)
Info
Contact disks
A
must be mounted between battery terminals
4
and cable
sockets
5
with the claws facing up.
–
Slide positive terminal cover
6
over the positive terminal.
Subsequent work
–
Mount the seat. ( p. 9)