KTM 2012 505 SX Скачать руководство пользователя страница 83

Страница: 83 / 197

MAINTENANCE WORK ON THE CHASSIS

301825-10

–

Put in both parts together, position them and fix them with the air filter support

Info

If the air filter is not correctly mounted, dust and dirt can penetrate into the
engine and can cause damage.

–

Mount the air filter box lid.

Info

If the air filter box lid is not correctly mounted, dust and dirt can penetrate into
the engine and cause damage.

–

Mount the seat. (

p. 78)

10.17

Cleaning the air filter and air filter box

Warning

Environmental hazard

Hazardous substances cause environmental damage.

–

Oil, grease, filters, fuel, cleaners, brake fluid, etc., should be disposed of as stipulated in applicable regulations.

Info

Do not clean the air filter with fuel or petroleum since these substances attack the foam.

–

Remove the air filter.

(

p. 79)

–

Wash the air filter thoroughly in special cleaning liquid and allow it to dry properly.

Air filter cleaner (

p. 186)

Содержание 2012 505 SX






































































































































































































Результаты поиска

Содержание 2012 505 SX

Отзывы:

Похожие инструкции для 2012 505 SX

Бренды по названию

Популярные бренды

KTM 2012 505 SX, Руководство пользователя

Результаты поиска

Содержание 2012 505 SX

Отзывы:

Похожие инструкции для 2012 505 SX

Бренды по названию

Популярные бренды