KTM 2010 450 SX, Руководство по ремонту, Страница: 138 / 247

30/ENGINE - WORK ON INDIVIDUAL PARTS
136
19.37
Checking the electric starter mode
5 5
6 6
2 2
1 1
3 3
4 4
301211-01
–
Check the gear mesh and bearing of starter idler gear

for damage and wear.
» If there is damage or wear:
–
Change the starter idler gear.
–
Check the gear mesh and bearing of torque limiter

for damage and wear.
» If there is damage or wear:
–
Change the torque limiter.
–
Check the gear mesh and bearing of freewheel gear

for damage and wear.
» If there is damage or wear:
–
Change the freewheel gear or bearing.
–
Check free wheel

for damage and wear when it is disassembled.
» If there is damage or wear:
–
Change the free wheel.
–
Checking the gear mesh of starter motor

for damage and wear
» If there is damage or wear:
–
Change the starter motor.
–
Change O-ring

of the starter motor.
–
Connect the negative cable of a 12 volt power supply to the housing of the starter motor. Briefly connect the positive cable of the
power supply with the connector of the starter motor.
» If the starter motor does not turn when the circuit is closed:
–
Change the starter motor.
PartShark.com
877-999-5686