KTM 1290 Super Duke R 2017 Скачать руководство пользователя

Страница: 68 / 247

COMBINATION INSTRUMENT

7.13.20 Warning

K00758-01

Condition

• Message or warning is present.

–

Press the

SET

button when the menu is closed.

–

Press the

DOWN

button until the

Warning

menu appears on the display.

–

Press the

SET

button.

–

Use the

DOWN

button to navigate through the warnings.

In the

Warning

menu, all warnings that occurred are displayed and stored.

7.13.21 MTC/ABS

K00757-01

Condition

• The vehicle is stationary.

Warning

Voiding of the government approval for road use and the insurance coverage

the ABS is switched off completely, the vehicle's approval for road use is invali-
dated.

–

Only operate the vehicle in closed-off areas remote from public road traffic if
the ABS is switched off completely.

–

Press the

SET

button when the menu is closed.

–

Press the

DOWN

button until the

MTC/ABS

menu appears on the display.

–

Press

SET

button.

–

Press the

DOWN

button to navigate to the required menu item.

–

Press and hold the

SET

button for 3-5 seconds.

Содержание 1290 Super Duke R 2017
























































































































































































































































Результаты поиска

Содержание 1290 Super Duke R 2017

Отзывы:

Похожие инструкции для 1290 Super Duke R 2017

Бренды по названию

Популярные бренды

KTM 1290 Super Duke R 2017, Руководство пользователя

Результаты поиска

Содержание 1290 Super Duke R 2017

Отзывы:

Похожие инструкции для 1290 Super Duke R 2017

Бренды по названию

Популярные бренды