KTM 1290 Super Duke R 2017, Руководство пользователя

Страница: 101 / 247

10 RIDING INSTRUCTIONS
99
Note
Transmission damage Incorrect use of the quick will damage the transmission.
The quick can only be used if the function is enabled in the combination instrument.
The quick is not active if you pull the clutch lever.
–
Only use the quick in the permitted speed range shown.
Info
If you hear unusual noises while riding, stop immediately, switch off the engine, and contact an authorized KTM workshop.
402299-11
–
Shift into a higher gear when conditions allow (incline, road situation, etc.).
–
Release the throttle while simultaneously pulling the clutch lever, shift into the next
gear, release the clutch lever, and open the throttle.
Info
You can see the positions of the 6 forward gears in the figure. The idle position
is between the first and second gears. First gear is used for starting off or for
steep inclines.
–
After reaching maximum speed by fully opening the throttle grip, turn the throttle back
so it is ¾ open. This will barely reduce the speed but fuel consumption will be consid-
erably lower.
–
Accelerate only up to a speed suitable for the road surface and weather conditions. Par-
ticularly in bends, do not shift, and accelerate very carefully.
–
Brake if necessary and close the throttle at the same time in order to shift down.
–
Pull the clutch lever and shift into a lower gear, release the clutch lever slowly, and
open the throttle or shift again.
–
If the engine stalls (e.g. at a crossroads), just pull the clutch lever and press the emer-
gency OFF switch/electric starter button into the lower position . You do not have to
shift into neutral.