KTM 1290 Super Adventure, Руководство пользователя

Страница: 174 / 262

15 WHEELS, TIRES
172
–
Holding the rear wheel, withdraw the wheel spindle. Take the rear wheel out of the
swing arm.
Info
Do not operate the foot brake when the rear wheel is removed.
–
Remove the spacer

.
15.5 Installing the rear wheel
Warning
Danger of accidents Reduced braking efficiency due to oil or grease on the brake discs.
–
Always keep the brake discs free of oil and grease, and clean them with brake cleaner when necessary.
Warning
Danger of accidents No braking effect when operating the rear brake.
–
After installing the rear wheel, always operate the foot brake until the pressure point is reached.
–
Check the rear hub rubber dampers. ( p. 174)
V00129-10
–
Check the wheel bearing for damage and wear.
» If the wheel bearing is damaged or worn:
–
Change the rear wheel bearing.
–
Clean and grease shaft seal ring

and contact surface

of the spacer.
Long-life grease ( p. 246)
–
Insert the spacer.
–
Clean and grease the thread of the wheel spindle and nut.
Long-life grease ( p. 246)